Engine Specification - FD180H

Sr. No Engine System System Parameters
1. Engine Basic Data
a Injection Type Direct injection
b Aspiration Turbocharger
c Number of cylinders and its arrangement 4 cycle, in-line, 6 cylinder
d Bore x Stroke 126 x 135 (mm)
e Total Displacement 8.8 L
f Engine rotation (view from flywheel end) Counter clockwise
g Type of combustion chamber Direct injection, square form
h Firing order 1_5_3_6_2_4
2. Engine net performance
a Rated speed 2900 rpm
b Rated power 185 hp
c Specific fuel consumption 34 to 36 kg/hr
3. Fuel System
a Injection Pump Mechanical upright fuel injection pump
b Fuel Specification ASTM D 975 Diesel fuel
4. Exhaust system
a Maximum exhaust gas temperature 600°C
b Max exhaust back pressure 29 inch water
5. Lubrication System
a Lub oil specification SAE 15 W 40
b Total system capacity including sump and filter 28 Ltr
c Maximum lub oil temperature 70 to 90°C
d Lub oil filter 0818A
e Lub oil pressure 0.2 to 0.6 Mpa
f Minimum lub oil pressure at rated speed 0.2 Mpa
6. Cooling System
a Maximum engine water temperature 70 to 90°C
b Cooling system Forced close & cycle (heat exchanger)
7. Electrical System
a System voltage 24 volts
b Starter motor rating 6.6 kw